Home > Products > Valve > Control Valve > Samson Valve 82.7 Pneumatic Control Valve DIN

Samson Valve 82.7 Pneumatic Control Valve DIN

Samson Valve 82.7 Pneumatic Control Valve DIN is designed for standard and critical service applications, including process events such as erosion, abrasion, corrosion, cavitation, and flashing.  Samson Valve 82.7 Pneumatic Control Valve DIN design increases flow capacities with only a minor reduction in the pressure recovery factor making the design an ideal replacement for linear globe control designs even with cavitation and flashing process conditions present.

Samson Valve 82.7 Pneumatic Control Valve DIN has several standard options such as temperature extensions, heating jackets, special packing designs, noise attenuation, and cavitation prevention trim sets, etc. Samson Valve 82.7 Pneumatic Control Valve DIN can be assembled with a pneumatic, electric, hydraulic, or electro-hydraulic actuator also offered by the SAMSON group to complete the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with SAMSON GROUP actuators and valve accessories such as positioners, limit switches, and solenoid valves.

Product Features

Samson Valve 82.7 Pneumatic Control Valve DIN combines Rotary Efficiency with Globe Control Excellent Performance maximum flow capacity compared to globe and rotary plug with the straight-through flow path. High rangeability of up to 200:1. Anti-blowout valve shaft design to increase reliability, free flow path when open with less turbulence, reduced noise and wear on the internal and guiding parts, double eccentric plug design eliminates friction when the valve is opening/closing reduces wear in internal parts and required breakaway torques double eccentric plug design allows for the more accurate control vs. other rotary valve types. Only the highest grade materials are used for all internal components to ensure the longest possible service life.

Samson Valve 82.7-Pneumatic Control Valve-ANSI can be combined with the following actions:
R-Pneumatic rotary actuator with a rolling diaphragmspecial function:
·Long journey
·Torque up to 1000 Nm
·Very fine control
AT-Pneumatic rotary actuator with double piston
special function:
·Single action
MN-Pneumatic rotary diaphragm actuator
special function:
·With one or two central return springs
330 or 735 square centimeters of diaphragm area
· Spring torque up to 146 Nm
MZ-Pneumatic rotary diaphragm actuator
special function:
·With one or two central return springs
· Diaphragm area of 1636 or 3447cm²
· Spring torque up to 1976 Nm
MD-Pneumatic Rotary Diaphragm Actuator
special function:
·There are several return springs
· Diaphragm area of 1636 or 3447cm²
· Spring torque up to 8247 Nm
special function
·Pneumatic control valve adopts the double eccentric design
Options
·Reduce the noise of gas, steam, and liquid

Product Parameters

Product name Samson Valve 82.7 Pneumatic Control Valve DIN
Usage Throttle service

On/off service

Low temperature service

Pressure swing adsorption (PSA)

Version DIN
Medium temperature -196 to 500°C / -320.8 to 932°F
Valve size DN 25 to DN 300
Pressure Level PN 10 to PN 40
Supply Pneumatic

Application and After-Sales Service

Control valves are mainly used in the following areas:
1. Petroleum equipment
2. Hydropower station
3. Metallurgy
4. Ocean
5. Food and medicine
6. Rural and urban architecture
7. Rural and urban heating
8. Environmental protection
9. Gas
10. Pipeline

After-sales service

Online support and Video technical support.

Inquiry:

*
*
Please Choose:
*
Hot Product
Name * E-mail *
Tel Country Message *
x